CoolIT Systems

it was looking if it looks like something at all lol.

now from far it's very nice, so the next ones are going to be perfect.

the heatkiller performs very well with the coolits, better then the stock cpu cooler.

news toys in the house :









Everu TEC cooling from coolit needs to go INSIDE the Thermaltake Level 10 case :






primer :

Haha, every cooler in 1 case, I love it!!! Its good to see this rig again.

Ive spent lots of time staring at my pile of CoolIt coolers and thinking I should install it all in 1 case. I have a Mozart Tx I would have no problems getting everything into. Just never done it. I have at least 7 or 8 coolers.

Lucky guy you even have an Eliminator. I used to have 1 but sold it many years ago. I still miss that little beast of a cooler. Other than that the only 1 Im missing is the Dual Drive Bay, never had 1.

1 thing I want to point out as Im not sure if your aware but removing the FHE (blue blocks) is a very risky mod. The peltiers (white pads w/ wires) are very delicate and they have to be set w/ a precision adjustable torque screwdriver to 10lbs - any less...the FHE is ineffective - any more & you can crack the peltier. Its easy with the proper screwdriver but sadly they are not cheap and basically useless for anything else.



*I think I figured out why CoolIT TEC units are getting so hard to find. Its becouse all us hardcore users have them all.

i have also a Dual bay cooler, you see it on the table right above corner.
But i screwed it open for reserve parts if nesessairy.

coolit pump, etc

but what Peltier modules is Coolit using ?

60w or so ?

Yes every cooler goes in the thermaltake level 10 case, i was 1 month in the hospital, and that got me some delay, but now i'm back and the work goes further.

Yup, I seen the DDB.

Im not 100% on what pelts are used. All the data sheets say is....

Freezone Elite
Description/Features: 6 Solid State heat pump wafers
Power Consumption: 72 W (max)
Dimensions: 40mm x 40mm x 3.5mm
Weight: 20 g (each)

Boreas
Description/Features: 12 Solid State heat pump wafers
Power Consumption: 144 W (max)
Dimensions: 40mm x 40mm x 3.5mm
Weight: 20 g (each)

i was 1 month in the hospital, and that got me some delay, but now i'm back and the work goes further.

Wow that is a long stay. I hope everything is well and you never have to do that again.

Freezone Elite and the Boreas Chiller are ready with paint, only sleeving needs to be done :





The Boreas Chiller, and how it's going to be mounted on the Level10 case :

[youtube][/youtube]




Boreas Against the case instead of the HDD trays, while Freezone and Freezone Elite gets in the motherboard box :




Take the form of the HDD trays with vertical lines and air trap, i will use red smoke acryl :